3-way toggle that fits in existing EVH Wolfgang tone hole?

**ATONESIR** · 10.20.20, 07:01 AM

Like other players here, I moved my toggle, added a killswitch to cover the toggle hole, and removed the tone pot on my EVH standard.

I want a smaller 3-way like on the EBMM. I was wondering if anyone knows of sources and part numbers for a 3-way toggle that will not require widening of the hole for the tone pot?

EB sells toggles but for $25, which seems a bit silly, so there must be a generic source for these -- I'm not a fan of the existing toggle (it feels cheap). If anyone can provide a link or a part number I very much appreciate it.

**BenB5152** · 10.21.20, 10:10 AM

I found a similar switch on ebay. Here’s a link.

https://www.ebay.com/itm/112373500230

**ATONESIR** · 10.21.20, 03:21 PM

Originally Posted by BenB5152

I found a similar switch on ebay. Here’s a link.

https://www.ebay.com/itm/112373500230

Appreciate it. Can't find any specs on that switch. Did the tone hole require widening or is the threaded part narrow enough to slide through the existing hole?

**ATONESIR** · 10.21.20, 06:29 PM

Originally Posted by ATONESIR

Appreciate it. Can't find any specs on that switch. Did the tone hole require widening or is the threaded part narrow enough to slide through the existing hole?

it requires an 13mm opening. Existing opening is 9mm. My bad, I didn't scroll all the way to the bottom of the listing.