Follow us on...
Follow us on Twitter Follow us on Facebook Watch us on YouTube
Register
Save
Page 1 of 4 1234 LastLast
Results 1 to 15 of 71

Hybrid View

  1. #1
    Good Enough
    Join Date
    05.11.14
    Posts
    2,363
    Favorite VH Album

    Van Halen
    Favorite VH Song

    I'm the One
    Last Online

    07.21.19 @ 08:13 AM
    Likes
    1,606
    Liked 1,658 Times in 889 Posts

    Default Building a guitar......

    Is it as easy as ordering your parts and just screwing it all together or is there craftmanship required?

    If you're getting bodies and necks from different places how do you know they're going to fit together?

    How do you know if the body is going to be routed correctly for the trem you want?

    Can you get a quality guitar for considerable saving on the cost of buying a pre-assembled brand one?

  2. #2
    Emperor of VHLinks.com Brett's Avatar
    Join Date
    09.02.99
    Age
    48
    Location
    Somewhere Near LA
    Posts
    73,775
    Favorite VH Album

    Fair Warning
    Favorite VH Song

    Unchained
    Last Online

    09.22.19 @ 04:01 AM
    Likes
    2,151
    Liked 16,569 Times in 7,288 Posts

    Default Building a guitar......

    BC youíve never built a guitar before? Iím surprised.

    I mean yeah itís pretty much as simple as buying the parts and screwing them all together. Youíll probably have to do some easy drilling of holes too. You also have to be able to set up your guitar or else youíll have to take it to a pro and that will cost a bit of money, but most of us have figured out how to set up our guitars pretty easily. I have never needed to take mine to be set up.

    I just always buy my body and necks from the same place so I know theyíll fit, and you can choose the routing you want for the trem before you buy. All that stuff is done for you man. But most of the time the sizes are pretty standard so youíll be able to fit bodies and necks together even if they arenít from the same place.

    If you know what you like to play and how you want to sound then yeah itís a good route to go because it does save money and you get what you want. And absolutely you do get a quality product if you buy from a good place.

    Of course I say that and I just bought a brand new guitar last week for the first time in years. Haha.
    Webmaster
    VHLinks.com - Your Van Halen Internet Resource Guide
    http://www.vhlinks.com

    JamToThis.com
    Audio/Video Trading Community
    Tons of Van Halen!

  3. The Following Member Likes This Post:


  4. #3
    Good Enough
    Join Date
    08.27.09
    Posts
    1,635
    Last Online

    09.19.19 @ 08:05 PM
    Likes
    291
    Liked 1,206 Times in 443 Posts

    Default

    Quote Originally Posted by BlofeldsCat View Post
    If you're getting bodies and necks from different places how do you know they're going to fit together?

    How do you know if the body is going to be routed correctly for the trem you want?
    Sometimes you have to shave the pocket to get the neck to fit. Maybe the neck finish is to thick or the neck pocket is to small.

    Also, it sucks when you have tremolo bushes or post holes that donít align with the neck pocket. Your only solution is to hack the neck pocket and it not only looks bad, you lose tone.

    The last few bodies that I bought, I bought without having the bushes or post holes drilled. I drilled them after attaching the neck in mock-up.

    Direct mounting pickups is always fun. A small trim router is your best friend unless you have to add wood.

    Donít expect your first guitar to be perfect. If youíre cool with that itís fun and a great learning experience.

  5. #4
    Baluchitherium Jedi McFly's Avatar
    Join Date
    05.29.03
    Age
    31
    Posts
    4,981
    Last Online

    09.22.19 @ 03:35 AM
    Likes
    3,932
    Liked 4,485 Times in 1,700 Posts


    Premium Member

    Donor

    Default Building a guitar......

    Most partscasters are Fender style, and this neck pockets and such are built to Fender spec. Youíll have no problem mating a Warmoth/Fender/Musikraft/KNE/Locke/etc body. There are little things to look out for like differences between Strat and Tele neck heels (you can put a Strat neck on a Tele, but you canít always put a Tele neck on a Strat.

    Like Brett said - as long as you get the setup right you can get a hell of a value out of building a guitar. My two main Super Strats are partscasters that cost less than $1k each. But with high end pickups, stainless frets, exotic neck woods, and Floyds the only thing comparable might be a Suhr - and those are like 2.5x the price!

    Here are some Partscasters Iíve put together...












  6. The Following 2 Members Like This Post:


  7. #5
    Good Enough
    Join Date
    05.11.14
    Posts
    2,363
    Favorite VH Album

    Van Halen
    Favorite VH Song

    I'm the One
    Last Online

    07.21.19 @ 08:13 AM
    Likes
    1,606
    Liked 1,658 Times in 889 Posts

    Default

    Yeah, I've never built my own – too scared it would go wrong as Lad mentioned. TBH I've always felt stupid, like the kid who's too afraid to jump in the pool whilst everyone else has fun, but didn't want to risk burning hundreds of pounds. I'm also short on patience when it comes to learning things I'm not naturally drawn to, like routing differences and screw placement, and struggle to focus and take it all in. It's the same reason why I'm also a recording neophyte.

    I've had a quick scan over at Warmouth and BYO. BYO's Lunatic option (EVH Kramer clone) is very, very cheap. $184 for a mahogany body and every other part required to build a guitar Sure, the rest of the materials are probably naff and you can upgrade them at extra cost but $184 still gets you a solid slab of mahogany whereas Warmouth are wanting $220 for a body alone – and they charge extra for all your routing and contouring options - and up to $550 for a ready-to-ship body. So why the disparity in price?

    Even just concocting my own from scratch from Warmouth – without paying for a pre-made body – I'm already $300+ in the hole for a body and I've still got the rest to buy. Contrast this to your average off-the-shelf Charvel San Dimas and it's not looking cost effective. Part of me says the Lunatic is too cheap to be any good but on the other hand, wood is wood and maybe Warmouth are trading off their rep so already, right at the start, I'm worried about making a mistake. I'm also not comfortable buying an unpainted guitar because as much as I'm drawn to self-expression like all Eddie fans, I wouldn't trust myself to run with scissors let alone paint a pro finish.


    BYO Lunatic
    http://www.byoguitar.com/Guitars/Ele...O-Lunatic.aspx


    Warmouth Soloist (BYO)
    http://www.warmoth.com/Guitar/Bodies...r.aspx?style=8


    Warmouth Soloist ready-made
    http://www.warmoth.com/Pages/Classic...?Body=2&Type=8
    Last edited by BlofeldsCat; 02.10.19 at 04:58 AM.

  8. #6
    Good Enough
    Join Date
    05.11.14
    Posts
    2,363
    Favorite VH Album

    Van Halen
    Favorite VH Song

    I'm the One
    Last Online

    07.21.19 @ 08:13 AM
    Likes
    1,606
    Liked 1,658 Times in 889 Posts

    Default

    Jedi, it's your latest Partscaster thread that got me interested again. Your guitars look great but it's your explanation of how and why you made your choices that threw me off and I slipped away again.

    Brett says if you know what you like to play it's easy but I still can't decide as I like a variety of superstrats - Charvels, Hamers, Ibanez and TBH, I don't even know the answer on some options. Do I want wood-mounted PU? Yeah, I guess so, for no other reason than they look cool. Angled headstock? Uhhh, dunn0. 12" Ibanez radius or 16" Jackson? Pass. What Floyd? Any decent one I can get hold of, from an OFR to Gotoh to FRT-1000 to Ping so no I can't answer Warmouth's questions on what type of trem routing I want. Contours and cutaways? Dunno. Side jack options? Don't care but am I missing something in not caring? Mounting holes? Never gave them a thought. Radius? Again, pass, I've played various-sized superstrats. And just how big do I want my jumbo frets, string nut, tuner holes and what type of tuning pegs? I've never cared for such anal-issues. I want the Hamer upside down side jack but no one seems to sell them or offer the routing options. Hell, ,I can't even tell you if I want a finished neck let alone what type of finish!

    It seems Warmouth only have Strat, Tele and pseudo-Jackson necks so where did you get your Kramer neck and how did you know it would fit? What if I want a neck I've seen on eBay but don't know the manufacturer? Plus Warmouth's Jacksons come with this annoying pointy bit on the underside for some reason. I guess it's easy enough to shave down but a) I don't have a wood plane and b) I'd probably hack the headstock up.

    So you can see how lost I am and how off-putting it is. Another thing that is confusing, most Warmouth-based guitars tend to have no name on the headstock yet I've seen a video where the guy gets a mean-looking all-black Strat headstock with the Fender logo so not sure what happened there but I know I'd love a HM Strat logo neck.

    Ultimately I'd like a Soloist Superstrat but would be happy with an EVH San Dimas to start with if it's easier and the BYO with OFR and SD pickups is coming in at a completed cost of just a Warmouth body!

    Maybe building and painting your own is really easy but I'm not ready to drop $1000 to find out if I'm right or not.


    PS: how good would you rate your EVH Wolfgang compared to the official product?
    Last edited by BlofeldsCat; 02.10.19 at 05:03 AM.

  9. #7
    Emperor of VHLinks.com Brett's Avatar
    Join Date
    09.02.99
    Age
    48
    Location
    Somewhere Near LA
    Posts
    73,775
    Favorite VH Album

    Fair Warning
    Favorite VH Song

    Unchained
    Last Online

    09.22.19 @ 04:01 AM
    Likes
    2,151
    Liked 16,569 Times in 7,288 Posts

    Default Building a guitar......

    Dude if you canít make a decision on any of those things then yes I mean maybe building a guitar is not for you. You need to know a little bit what you like to play and just buy those parts. You have to be willing to invest a little bit to learn. At some point if you want to do this youíre gonna have to just jump in with a little faith. Itís not the hardest thing in the world to do you just have to take your time. If you lose patience and you rush then yeah youíre gonna fuck it up.

    Those cheap kids come with cheap hardware and lower grade woods. Actually if youíre so worried about spending the money maybe itís worth it to buy one just so you can see if you can really build it and then you can get a nicer stuff next time. Warmoth makes high-end parts with great quality thatís why itís expensive. Plus they are licensed by Fender so they can make Strat necks, etc. I had a Warmoth body with a KNE neck and had no fitment issue. It was a beautiful guitar. I sold it because I just didnít play it enough.

    I bought this body from Warmoth, I had all the holes and everything pre-drilled by them. I got a neck I really like from KNE. He drilled standard Strat holes and and I just slapped them together and put all the parts on. Yes I had to drill holes for the tuning pegs, retainer bar, and for the strap buttons, but that isnít very hard. And some guitars Iíve drilled holes for volume pots.

    And this was the first guitar I built for myself back in 2006 or so and had no issues. After that I felt I could handle doing the striped stuff and Iíve yet to fuck one of those up either.




    I was bored with one of my Partscasters recently and just decided to turn it into Dave Murray-inspired Strat. It was really easy.
    Webmaster
    VHLinks.com - Your Van Halen Internet Resource Guide
    http://www.vhlinks.com

    JamToThis.com
    Audio/Video Trading Community
    Tons of Van Halen!

  10. The Following Member Likes This Post:


  11. #8
    Atomic Punk Dave's Dreidel's Avatar
    Join Date
    01.10.05
    Age
    48
    Location
    P.F. Chang, South Korea
    Posts
    47,330
    Favorite VH Album

    Alex, Dave, Ed and Mike
    Favorite VH Song

    The songs with Ed on them
    Last Online

    09.22.19 @ 03:09 AM
    Likes
    5,305
    Liked 26,201 Times in 13,224 Posts


    Premium Member

    Default

    I am just starting to get into it, so I bought the cheapest kit I could find. If it works out and I like building it, I will venture onto more expensive pieces. If not, no big investment lost.

    It's not like I plan on building a gig worthy piece right out of the gate. Walk before you can run.
    If I don't respond to you it means I have you on ignore, which means you are a douchenozzle.

    Emperor Brett - "I can't believe you guys are analyzing song-by-song Van Halen III? What next, analyzing the script of Stroker Ace looking for some shred of Citizen Kane?"

    David Lee Roth did the impossible. He made Van Halen better. Deal with it!

    A man's rights rests in three boxes: the ballot box, the jury box, and the cartridge box

    Hurricane Halen - Let's all gingery touch our sword tips!!!

  12. The Following 2 Members Like This Post:


  13. #9
    Good Enough
    Join Date
    05.11.14
    Posts
    2,363
    Favorite VH Album

    Van Halen
    Favorite VH Song

    I'm the One
    Last Online

    07.21.19 @ 08:13 AM
    Likes
    1,606
    Liked 1,658 Times in 889 Posts

    Default

    Quote Originally Posted by Brett View Post
    You need to know a little bit what you like to play and just buy those parts. You have to be willing to invest a little bit to learn. At some point if you want to do this you’re gonna have to just jump in with a little faith.
    I hear ya. Guess I just got overwhelmed with the choices of what I *do* know about as well as the bots that I don't. I reckon I can just pick pretty much any input jack, jumbo frets and tuners and quickly get advice on the rest. Still not convinced about painting a guitar or of cobbling parts from various sources as unsure what I'm looking for to make sure they fit together.

    I just don't wanna spend a good wedge on a cheapo if it's shit. Would rather take the chance on a Warmy.


    Those cheap kids come with cheap hardware and lower grade woods.
    an you get various grades of the same wood - of mahogany, alder, maple? Good to know Warmouth are high-end, though. What's KNE?


    I bought this body from Warmoth, I had all the holes and everything pre-drilled by them. I got a neck I really like from KNE. He drilled standard Strat holes and and I just slapped them together and put all the parts on. Yes I had to drill holes for the tuning pegs, retainer bar, and for the strap buttons, but that isn’t very hard. And some guitars I’ve drilled holes for volume pots.
    If it really isn't hard and all you need is a drill - which is one DIY tool I do have - then I'm ready to give it a shot. You only live once. That guitar looks great. Love the flame finish - I'm guessing that was factory done not yourself? How was the quality and if you can, what would it retail for if sold by Ibanez/Jackon/Charvel (Jap or Mexico-made)?

    Any reason why the headstock is blank and without the Fender logo as I've seen others have?


    I was bored with one of my Partscasters recently and just decided to turn it into Dave Murray-inspired Strat. It was really easy.
    Looks great. See the jack? I want that on the side but inverted. Is that possible to get that routed by the company?


    So let this thread be the start of education so anyone wanna dive in with answers to my above questions, or the ins and outs of trem block post drilling, or whether you need specific tuning pegs for a FR, then go ahead please.

  14. #10
    Emperor of VHLinks.com Brett's Avatar
    Join Date
    09.02.99
    Age
    48
    Location
    Somewhere Near LA
    Posts
    73,775
    Favorite VH Album

    Fair Warning
    Favorite VH Song

    Unchained
    Last Online

    09.22.19 @ 04:01 AM
    Likes
    2,151
    Liked 16,569 Times in 7,288 Posts

    Default Building a guitar......

    Quote Originally Posted by BlofeldsCat View Post
    I hear ya. Guess I just got overwhelmed with the choices of what I *do* know about as well as the bots that I don't. I reckon I can just pick pretty much any input jack, jumbo frets and tuners and quickly get advice on the rest. Still not convinced about painting a guitar or of cobbling parts from various sources as unsure what I'm looking for to make sure they fit together.
    You donít have to paint it, you can buy a body already factory-painted. The only time I havenít bought a factory-painted guitar are on the stripe ones Iíve done that Iíve painted myself.

    You should be just fine buying parts from all over as long as theyíre just standardized parts.

    I just donít wanna spend a good wedge on a cheapo if itís shit. Would rather take the chance on a Warmy.
    I agree I donít think youíll have much issue if you buy a better axe, just take your time.

    an you get various grades of the same wood - of mahogany, alder, maple? Good to know Warmouth are high-end, though. What's KNE?
    KNE Guitars is another guy who makes EVH-type stuff. He makes great bodies and necks although he will not cut a Strat headstock for you because he doesnít have the rights. Yes he does it for me on the down low but thatís because I know him and Iíve bought a lot of stuff from him. He will not do it for anyone else as he does not want to get in trouble. He is local for me so I love using his stuff and I have his necks on almost everything. I actually drive to his house to pick my stuff up. So basically my custom guitars all feel the same.

    All these striped guitars are KNE necks and bodies. And the neck on that Dave Murray thing is too.




    If it really isnít hard and all you need is a drill - which is one DIY tool I do have - then Iím ready to give it a shot. You only live once. That guitar looks great. Love the flame finish - I'm guessing that was factory done not yourself? How was the quality and if you can, what would it retail for if sold by Ibanez/Jackon/Charvel (Jap or Mexico-made)?
    Yeah it was on the Warmoth site. I just picked one I liked and bought it. I had them drill the holes where I wanted and that was it. It was an amazing guitar but like I said I just didnít play it a lot, so I wanted it to have a good home. To me it was easily an $1,100 guitar if it had a name brand on it. It had a real German Floyd on it, Schaller tuners, and a Wolfgang pickup. It was a quality axe that sounded great.

    Any reason why the headstock is blank and without the Fender logo as Iíve seen others have?
    Because it ainít a Fender.

    I donít put any logos on my headstocks, unless Iím making a 5150 and I put the Kramer one on there.


    Looks great. See the jack? I want that on the side but inverted. Is that possible to get that routed by the company?
    You want a Strat jack on the side of the body?

    So let this thread be the start of education so anyone wanna dive in with answers to my above questions, or the ins and outs of trem block post drilling, or whether you need specific tuning pegs for a FR, then go ahead please.
    Youíre not going to drill the trem holes. You need to buy a body that already has Floyd holes in it, or if you buy it from Warmoth they do it as part of the price. Most companies do drill them for you. I would never buy one where I have to drill them myself.

    You donít need specific tuning pegs for a Floyd. Just make sure they are inline for a Strat neck if thatís what youíre going for.
    Webmaster
    VHLinks.com - Your Van Halen Internet Resource Guide
    http://www.vhlinks.com

    JamToThis.com
    Audio/Video Trading Community
    Tons of Van Halen!

  15. #11
    Atomic Punk Get The Show On The Road's Avatar
    Join Date
    01.05.12
    Age
    44
    Location
    6300 feet above sea level
    Posts
    16,594
    Favorite VH Album

    Van Halen
    Favorite VH Song

    I'm The One
    Last Online

    09.22.19 @ 04:11 AM
    Likes
    26,407
    Liked 16,412 Times in 8,639 Posts


    Premium Member

    Default

    Quote Originally Posted by Brett View Post
    You don’t have to paint it, you can buy a body already factory-painted. The only time I haven’t bought a factory-painted guitar are on the stripe ones I’ve done that I’ve painted myself.

    You should be just fine buying parts from all over as long as they’re just standardized parts.



    I agree I don’t think you’ll have much issue if you buy a better axe, just take your time.



    KNE Guitars is another guy who makes EVH-type stuff. He makes great bodies and necks although he will not cut a Strat headstock for you because he doesn’t have the rights. Yes he does it for me on the down low but that’s because I know him and I’ve bought a lot of stuff from him. He will not do it for anyone else as he does not want to get in trouble. He is local for me so I love using his stuff and I have his necks on almost everything. I actually drive to his house to pick my stuff up. So basically my custom guitars all feel the same.

    All these striped guitars are KNE necks and bodies. And the neck on that Dave Murray-thing is too.






    Yeah it was on the Warmoth site. I just picked one I liked and bought it. I had them drill the holes where I wanted and that was it. It was an amazing guitar but like I said I just didn’t play it a lot, so I wanted it to have a good home. To me it was easily an $1,100 guitar if it had a name brand on it. It had a real German Floyd on it, Schaller tuners, and a Wolfgang pickup. It was a quality axe that sounded great.



    Because it ain’t a Fender.

    I don’t put any logos on my headstocks, unless I’m making a 5150 and I put the Kramer one on there.




    You want a Strat jack on the side of the body?



    You’re not going to drill the trem holes. You need to buy a body that already has Floyd holes in it, or if you buy it from Warmoth they do it as part of the price. Most companies do drill them for you. I would never buy one where I have to drill them myself.

    You don’t need specific tuning pegs for a Floyd. Just make sure they are inline for a Strat neck if that’s what you’re going for.
    Lol, that explains why my bridge is slightly off on the one guitar I built years ago.

    I originally put the non locking bar from my Ibanez on it and then I bought a Floyd later. Of course the holes didn't line up so i drilled them myself. I probably should have taken it somewhere but I was 19 and impatient so I didn't.

    Of course when I got the thing on I noticed it was slightly crooked. I was able to adjust the saddles a little bit to compensate but it still is off.

    Oh well. Too bad this site didn't exist in 1994.
    The only genre I really know is Van Halen.

  16. #12
    Sinner's Swing! Rokgtar's Avatar
    Join Date
    11.14.99
    Posts
    3,737
    Last Online

    09.21.19 @ 07:18 PM
    Likes
    1,372
    Liked 1,757 Times in 876 Posts


    Premium Member

    Default

    Quote Originally Posted by Brett View Post
    You donít have to paint it, you can buy a body already factory-painted. The only time I havenít bought a factory-painted guitar are on the stripe ones Iíve done that Iíve painted myself.

    You should be just fine buying parts from all over as long as theyíre just standardized parts.



    I agree I donít think youíll have much issue if you buy a better axe, just take your time.



    KNE Guitars is another guy who makes EVH-type stuff. He makes great bodies and necks although he will not cut a Strat headstock for you because he doesnít have the rights. Yes he does it for me on the down low but thatís because I know him and Iíve bought a lot of stuff from him. He will not do it for anyone else as he does not want to get in trouble. He is local for me so I love using his stuff and I have his necks on almost everything. I actually drive to his house to pick my stuff up. So basically my custom guitars all feel the same.

    All these striped guitars are KNE necks and bodies. And the neck on that Dave Murray thing is too.






    Yeah it was on the Warmoth site. I just picked one I liked and bought it. I had them drill the holes where I wanted and that was it. It was an amazing guitar but like I said I just didnít play it a lot, so I wanted it to have a good home. To me it was easily an $1,100 guitar if it had a name brand on it. It had a real German Floyd on it, Schaller tuners, and a Wolfgang pickup. It was a quality axe that sounded great.



    Because it ainít a Fender.

    I donít put any logos on my headstocks, unless Iím making a 5150 and I put the Kramer one on there.




    You want a Strat jack on the side of the body?



    Youíre not going to drill the trem holes. You need to buy a body that already has Floyd holes in it, or if you buy it from Warmoth they do it as part of the price. Most companies do drill them for you. I would never buy one where I have to drill them myself.

    You donít need specific tuning pegs for a Floyd. Just make sure they are inline for a Strat neck if thatís what youíre going for.
    Brett - I see the top of what looks like an Orange practice amp there - correct? What model is it? You like?

    I just picked up a small 15 watt Orange practice amp from my boss for 30 bucks. I must say, I've really been enjoying the clean tones from it via my Strat and Tele. For 30 bucks I just couldn't miss.

  17. #13
    Emperor of VHLinks.com Brett's Avatar
    Join Date
    09.02.99
    Age
    48
    Location
    Somewhere Near LA
    Posts
    73,775
    Favorite VH Album

    Fair Warning
    Favorite VH Song

    Unchained
    Last Online

    09.22.19 @ 04:01 AM
    Likes
    2,151
    Liked 16,569 Times in 7,288 Posts

    Default

    Quote Originally Posted by Rokgtar View Post
    Brett - I see the top of what looks like an Orange practice amp there - correct? What model is it? You like?

    I just picked up a small 15 watt Orange practice amp from my boss for 30 bucks. I must say, I've really been enjoying the clean tones from it via my Strat and Tele. For 30 bucks I just couldn't miss.
    Itís a Crush 20RT. Itís a good practice amp, but Iím not a huge fan of the overdrive tone itís a little dark for me. So I have a Friedman BE-OD that I usually run for my distortion on the clean channel.
    Webmaster
    VHLinks.com - Your Van Halen Internet Resource Guide
    http://www.vhlinks.com

    JamToThis.com
    Audio/Video Trading Community
    Tons of Van Halen!

  18. The Following Member Likes This Post:


  19. #14
    Emperor of VHLinks.com Brett's Avatar
    Join Date
    09.02.99
    Age
    48
    Location
    Somewhere Near LA
    Posts
    73,775
    Favorite VH Album

    Fair Warning
    Favorite VH Song

    Unchained
    Last Online

    09.22.19 @ 04:01 AM
    Likes
    2,151
    Liked 16,569 Times in 7,288 Posts

    Default

    If you take your time you can build a gig-worthy instrument out of the gate.
    Webmaster
    VHLinks.com - Your Van Halen Internet Resource Guide
    http://www.vhlinks.com

    JamToThis.com
    Audio/Video Trading Community
    Tons of Van Halen!

  20. The Following Member Likes This Post:


  21. #15
    Atomic Punk Dave's Dreidel's Avatar
    Join Date
    01.10.05
    Age
    48
    Location
    P.F. Chang, South Korea
    Posts
    47,330
    Favorite VH Album

    Alex, Dave, Ed and Mike
    Favorite VH Song

    The songs with Ed on them
    Last Online

    09.22.19 @ 03:09 AM
    Likes
    5,305
    Liked 26,201 Times in 13,224 Posts


    Premium Member

    Default

    Quote Originally Posted by Brett View Post
    If you take your time you can build a gig-worthy instrument out of the gate.
    I'm assuming I am going to mess something up, if I don't, great.
    If I don't respond to you it means I have you on ignore, which means you are a douchenozzle.

    Emperor Brett - "I can't believe you guys are analyzing song-by-song Van Halen III? What next, analyzing the script of Stroker Ace looking for some shred of Citizen Kane?"

    David Lee Roth did the impossible. He made Van Halen better. Deal with it!

    A man's rights rests in three boxes: the ballot box, the jury box, and the cartridge box

    Hurricane Halen - Let's all gingery touch our sword tips!!!

 

 

Similar Threads

  1. Guitar building
    By RandyEllefson in forum Guitar Room
    Replies: 9
    Last Post: 12.31.13, 08:53 PM
  2. building my own EVH guitar
    By Kenny666 in forum Guitar Room
    Replies: 1
    Last Post: 09.13.05, 03:29 PM
  3. building my own EVH guitar
    By Kenny666 in forum Guitar Room
    Replies: 9
    Last Post: 09.08.05, 05:31 AM
  4. building my own EVH guitar
    By Kenny666 in forum VH Fans Meeting Place (Non-Music)
    Replies: 3
    Last Post: 09.06.05, 01:51 PM
  5. building my own EVH guitar
    By Kenny666 in forum Guitar Room
    Replies: 0
    Last Post: 09.06.05, 01:39 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •