Quote Originally Posted by RRvh1 View Post
Hey, Rob.
Great tip and obviously it works. I posed this question in the Random Guitar Sh*t thread;

What's the best way to install Floyd Rose studs and bushings into a blank body? The holes were pre drilled by Warmoth. Just want as many opinions as possible. I've read about clamps, using a drill press, using a hammer etc.

Thanks.
basically what I do is I take the studs / bushings and I coat them in soap or wax and just make sure that the hole is a tad bit (not huge) smaller and use a rubble mallet and gently but forcefully pound them in slowly little by little being careful not to crack the wood. They should go right in and seat themselves tightly.

Rob